Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 800)

Brocade Mobility RFS Controller CLI Reference Guide 787
53-1003098-01
7
Example
rfs7000-37FABE(config-profile-default-rfs7000)#radius nas-port-id 1
rfs7000-37FABE(config-profile-default-rfs7000)#radius nas-identifier test
rfs7000-37FABE(config-profile-default-rfs7000)#show context
profile rfs7000 default-rfs7000
mint link ip 1.2.3.4
mint level 1 area-id 88
bridge vlan 1
bridging-mode isolated-tunnel
ip igmp snooping
ip igmp snooping querier
radius nas-identifier test
radius nas-port-id 1
neighbor-info-interval 6
neighbor-inactivity-timeout 500
--More--
rfs7000-37FABE(config-profile-default-rfs7000)#
Related Commands:
rf-domain-manager
Profile Config Commands
Enables the RF Domain manager
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
rf-domain-manager [capable|priority <1-255>]
Parameters
rf-domain-manager [capable|priority <1-255>]
Example
rfs7000-37FABE(config-profile-default-rfs7000)#rf-domain-manager priority 9
rfs7000-37FABE(config-profile-default-rfs7000)#show context
profile rfs7000 default-rfs7000
no Disables or reverts settings to their default
capable Enables a device to become a site manager
priority <1-255> Assigns a priority value for site manager selection
•
<1-255> – Select a priority value from 1 - 255.