Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 955)

944 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
13
Provides the domain name used by the controller with this pool
Domain names are not case sensitive and can contain alphabetic or numeric letters or a hyphen.
The FQDN consists of the host name and the domain name. For example,
computername.domain.com.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
domain-name
Parameters
domain-name
Example
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#domain-name
documentation
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#show context
dhcp-pool testPool
address 192.168.13.4 class dhcpclass1
ddns server 192.168.13.9
ddns domainname WID
ddns multiple-user-class
domain-name documentation
bootfile test.txt
default-router 192.168.13.8 192.168.13.9
dns-server 192.168.13.19
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#
Related Commands:
excluded-address
dhcp-pool-mode commands
Identifies a single IP address or a range of IP addresses, included in the DHCP address pool, that
cannot be assigned to clients by the DHCP server
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
Defines the DHCP pool’s domain name
no Removes a DHCP pool’s domain name