Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 204)

188 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
no accounting [radius|syslog]
no bypass captive-portal-detection
no custom-auth info
no redirection ports
no server host
no server mode {centralized-controller [hosting-vlan-interface]}
no use [aaa-policy|dns-whitelist]
no webpage external [acknowledgment|agreement|fail|login
{post}|no-service|welcome]
no webpage-auto-upload Disables automatic upload of advanced Web pages on a captive portal
no webpage-location Resets the use of custom Web pages for login, welcome, terms, and failure page. The default is
automatically created Web pages.
no accounting Disables accounting configurations
radius Disables support for sending RADIUS accounting messages
syslog Disables support for sending syslog messages to remote syslog servers
no bypass
captive-portal-detection Disables bypassing of captive-portal detection requests
no custom-auth Resets custom authentication information
info Resets the configuration of custom user information sent to the RADIUS server (for custom-auth-radius
access type)
no redirection ports Disables redirection of client connections to specified destination ports
no server host Clears captive portal server address
no server mode Configures the captive portal server mode
centralized-controller
hosting-vlan-interface Optional. Resets the hosting VLAN interface for centralized captive portal server to its default of zero (0)
no use Resets profiles used with a captive portal policy
aaa-policy Removes the AAA policy used with a captive portal policy
dns-whitelist Removes the DNS whitelist used with a captive portal policy
no webpage external Resets the external Web pages settings. These are the Web pages (externally located) displayed when a
user interacts with the captive portal.
acknowledgment Resets the acknowledgment page location
agreement Resets the agreement page settings
fail Resets the fail page settings
login {post} Resets the login page settings
•
post – Optional. Users are redirected to post internally when they try to authenticate