Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 535)

Brocade Mobility RFS Controller CLI Reference Guide 521
53-1003098-01
6
show wireless client {filter} {wlan [|not ]}
{on }
show wireless client {statistics} {detail |rf|window-data }
{(on )}
show wireless client {tspec} {} {(on )}
filter state
[data-ready|
not [data-ready|
roaming]|
roaming] Optional. Filters clients based on their state
•
data-ready – Selects wireless clients in the data-ready state
•
not [data-ready|roaming] – Inverts match selection. Selects wireless clients neither ready nor roaming
•
Roaming – Selects roaming clients
on
ME> The following keyword is common to the ‘ready’, ‘not’, and ‘roaming’ parameters:
•
on – Optional. Displays selected client details on a specified device or RF
Domain
wireless Displays wireless configuration parameters
client Displays client information based on the parameters passed
filter wlan
[|
not ] Optional. Filters clients on a specified WLAN
•
– Specify the WLAN name.
•
not – Inverts the match selection
on
E> The following keyword is common to the ‘WLAN and ‘not’ parameters:
•
on – Optional. Filters clients on a specified device or
RF Domain
wireless Displays wireless configuration parameters
client Displays client information based on the parameters passed
statistics
{detail |rf|
window-data } Optional. Displays detailed client statistics. Use additional filters to view specific details.
•
detail – Optional. Displays detailed client statistics
•
– Optional. Displays detailed statistics for a specified client. Specify the client’s MAC
address.
•
rf – Optional. Displays detailed client statistics on a specified device or RF Domain
•
window-data – Optional. Displays historical data, for a specified client
•
– Optional. Specify the client’s MAC address
on
E> The following keyword is recursive and common to the ‘detail ’, ‘RF’, and ‘window-data ’
parameters:
•
on – Optional. Displays client statistics, based on the parameters
passed, on a specified device or RF Domain
wireless Displays wireless configuration parameters
client Displays client information based on the parameters passed
tspec Optional. Displays detailed traffic specification (TSPEC) information for all clients or a specified client
•
– Optional. Displays detailed TSPEC information for a specified client. Specify the MAC
address of the client.
on
> The following keyword is recursive and common to the ‘tspec ’ parameter:
•
on – Optional. Displays detailed TSPEC information for wireless clients
on a specified device or RF Domain
•
– Specify the name of the AP, wireless controller, service platform, or
RF Domain.