Airtime-fairness – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 703
690
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
aggregation amsdu [rx-only|tx-rx]
Example
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#aggregation ampdu
tx-only
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context
interface radio1
aggregation ampdu tx-only
aeroscout forward
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#
Related Commands:
airtime-fairness
interface-config-radio-instance
Enables equal access for wireless clients based on their airtime usage
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
Syntax:
airtime-fairness {prefer-ht} {weight <1-10>}
Parameters
airtime-fairness {prefer-ht} {weight <1-10>}
Example
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#airtime-fairness
prefer-ht weight 6
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context
interface radio1
aggregation ampdu tx-only
aeroscout forward
airtime-fairness prefer-ht weight 6
aggregation
Configures 802.11n frame aggregation parameters
amsdu
Configures Aggregated MAC Service Data Unit (AMSDU) frame aggregation parameters. AMSDU
aggregation collects Ethernet frames addressed to a single destination. But, unlike AMPDU, it wraps all
frames in a single 802.11n frame.
rx-only
Supports the receipt of AMSDU aggregated frames only (default setting)
tx-rx
Supports the transmission and receipt of AMSDU aggregated frames
Disables 802.11n aggregation parameters
airtime-fairness
Enables equal access for wireless clients based on their airtime usage
prefer-ht
Optional. Gives preference to high throughput (802.11n) clients over legacy clients
weight <1-10>
Optional. Configures the relative weightage for 11n clients over legacy clients.
•
<1-10> – Sets a weightage ratio for 11n clients from 1 - 10