Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 52)

34 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
2
crypto pki export request [generate-rsa-key|use-rsa-key]
autogen-subject-name (,email ,fqdn
,ip-address )
Specify CA’s location in the following format:
tftp://[:port]/path/file
ftp://:@[:port]/path/file
sftp://@[:port]>/path/file
http://[:port]/path/file
cf:/path/file
usb:/path/file
NOTE: The CA certificate is imported from the specified location.
background
{on } Optional. Performs authentication in the background. Optionally specify a device on which to perform
authentication.
on Optional. Performs authentication on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
pki Enables PKI management. Use this command to authenticate, export, generate, or delete a trustpoint and
its associated CA certificates.
export request Exports CSR to the CA for digital identity certificate. The CSR contains applicant’s details and RSA Keypair’s
public key.
[generate-rsa-key|
use-rsa-key]
Generates a new RSA Keypair or uses an existing RSA Keypair
•
generate-rsa-key – Generates a new RSA Keypair for digital authentication
•
use-rsa-key – Uses an existing RSA Keypair for digital authentication
•
– If generating a new RSA Keypair, specify a name for it. If using an existing
RSA Keypair, specify its name.
autogen-subject-name Auto generates subject name from configuration parameters. The subject name identifies the certificate.
{background
{on on } Specify the CA’s location in the following format:
tftp://[:port]/path/file
ftp://:@[:port]/path/file
sftp://@[:port]>/path/file
http://[:port]/path/file
cf:/path/file
usb:/path/file
NOTE: The CSR is exported to the specified location.
•
background – Optional. Performs export operation in the background
•
on – Optional. Performs export operation on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
email
Exports CSR to a specified e-mail address
•
– Specify the CA’s e-mail address.
fqdn Exports CSR to a specified Fully Qualified Domain Name (FQDN)
•
– Specify the CA’s FQDN.
ip address Exports CSR to a specified device or system
•
– Specify the CA’s IP address.