Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 381)

Brocade Mobility RFS Controller CLI Reference Guide 365
53-1003098-01
4
wpa-wpa2 [exclude-wpa2-tkip|opp-pmk-caching|pmk-caching|preauthentication|
use-sha256-akm]
wpa-wpa2 handshake [attempts|init-wait|priority|timeout]
wpa-wpa2 handshake [attempts <1-5>|init-wait <5-1000000>|priority
[high|normal]|
timeout <10-5000> {10-5000}]
wpa-wpa2 key-rotation [broadcast|unicast] <30-86400>
wpa-wpa2 psk [0 |2 |]
wpa-wpa2 tkip-countermeasures holdtime <0-65535>
Parameters
wpa-wpa2 [exclude-wpa2-tkip|opp-pmk-caching|pmk-caching|preauthentication|
use-sha256-akm]
wpa-wpa2 handshake [attempts <1-5>|init-wait <5-1000000>|priority
[high|normal]|
timeout <10-5000> {10-5000}]
wpa-wpa2 key-rotation [broadcast|unicast] <30-86400>
wpa-wpa2 Modifies TKIP-CCMP (WPA/WPA2) related parameters
exclude-wpa2-tkip Excludes the Wi-Fi Protected Access II (WPA2) version of TKIP. It supports the WPA version of TKIP only
opp-pmk-caching Uses opportunistic key caching (same Pairwise Master Key (PMK) across APs for fast roaming with
EAP.802.1x
pmk-caching Uses cached pair-wise master keys (fast roaming with eap/802.1x)
preauthentication Uses pre-authentication mode (WPA2 fast roaming)
use-sha256-akm Uses sha256 authentication key management suite
wpa-wpa2 Modifies TKIP-CCMP (WPA/WPA2) related parameters
handshake Configures WPA/WPA2 handshake parameters
attempts <1-5> Configures the total number of times a message is transmitted towards a non-responsive client
•
<1-5> – Specify a value from 1 - 5.
init-wait
<5-1000000> Configures a minimum wait-time period, in microseconds, before the first handshake message is transmitted
from the AP
•
<5-1000000> – Specify a value from 5 - 1000000 microseconds.
priority [high|normal] Configures the relative priority of handshake messages compared to other data traffic
•
high – Treats handshake messages as high priority packets on a radio
•
normal – Treats handshake messages as normal priority packets on a radio
timeout <10-5000>
<10-5000> Configures the timeout period, in milliseconds, for a handshake message to retire. Once this period is exceed,
the handshake message is retired.
•
<10-5000> – Specify a value from 10 - 5000 milliseconds.
•
<10-5000> – Optional. Configures a different timeout between the second and third
attempts
wpa-wpa2 Modifies TKIP-CCMP (WPA/WPA2) related parameters
key-rotation Configures parameters related to periodic rotation of encryption keys. The periodic key rotation parameters
are broadcast, multicast, and unicast traffic.