Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1341)

Brocade Mobility RFS Controller CLI Reference Guide 1333
53-1003098-01
29
Feb 07 12:25:09 2013: %FILEMGMT-5-HTTPSTART: lighttpd started in external mode with pid 0
Feb 07 12:25:09 2013: %DAEMON-3-ERR: dhcrelay: interface allocate : vlan1
Feb 07 12:25:09 2013: %USER-5-NOTICE: FILEMGMT[1086]: FTP: ftp server stopped
Feb 07 12:25:09 2013: %DAEMON-3-ERR: dhcrelay: interface allocate : vlan1
Feb 07 12:25:09 2013: %DAEMON-3-ERR: dhcrelay: interface allocate : vlan1
Feb 07 12:25:09 2013: %DAEMON-3-ERR: dhcrelay: interface allocate : vlan2
Feb 07 12:25:09 2013: %DOT11-5-COUNTRY_CODE: Country of operation configured to in [India]
Feb 07 12:25:09 2013: %DIAG-6-NEW_LED_STATE: LED state message AP_LEDS_ON from module
DOT11
Feb 07 12:25:09 2013: %PM-6-PROCSTART: Starting process "/usr/sbin/telnetd"
Feb 07 12:25:09 2013: %AUTH-6-INFO: sshd[1422]: Server listening on 0.0.0.0 port 22.
dataplane enabled
CCB:21:Firewall enabled
Feb 07 12:25:09 2013: %KERN-4-WARNING: dataplane enabled.
Feb 07 12:25:09 2013: %DATAPLANE-5-FWSTARTUP: Firewall enabled.
Feb 07 12:25:09 2013: USER: cfgd: handle_cluster_member_update
Feb 07 12:25:09 2013: USER: cfgd: ignoring, no cluster configured
Feb 07 12:25:09 2013: %PM-6-PROCSTART: Starting process "/usr/sbin/sshd"
Manual time change log
The following example displays the manual time change log. The clock is manually set to Feb 07
12:25:33 2013.
Log change in time
rfs7000-37FABE#show clock
2013-02-07 12:25:33 UTC
rfs7000-37FABE#
rfs7000-37FABE#clock set 12:25:33 07 Feb 2013
Feb 07 12:25:33 2013: %[S1]CFGD-6-SYSTEM_CLOCK_RESET: System clock reset, Time:
2013-02-07 12:45:00[S2]
rfs7000-37FABE#show clock
Feb 07 12:45:00 UTC 2013
rfs7000-37FABE#
To generate a time log, logging has to be enabled
For example, the following command has to be executed:
rfs7000-37FABE#clock set 12:45:00 07 Feb 2013
rfs7000-37FABE#