Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1268)

1260 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
26
authentication server <1-2> retry-timeout-factor <50-200>
authentication server <1-2> timeout <3-60> {attempts <1-10>}
authentication service {protocol }
Example
rfs7000-37FABE(config-aaa-tacacs-policy-test)#authentication directed-request
rfs7000-37FABE(config-aaa-tacacs-policy-test)#show context
aaa-tacacs-policy test
authentication directed-request
accounting server preference authorized-server-number
accounting auth-fail
accounting commands
rfs7000-37FABE(config-aaa-tacacs-policy-test)#
Related Commands:
authorization
aaa-tacacs-policy
Configures authorization parameters
This feature allows network administrators to limit user accessibility and configure varying levels of
accessibility for different users.
server <1-2> Configures a TACACS authentication server. Up to 2 TACACS servers can be configured
•
<1-2> – Specify the TACACS server index from 1 - 2.
retry-timeout-factor
<50-200> Configures timeout scaling between two consecutive TACACS authentication retries
•
<50-200> – Specify the scaling factor from 50 - 200. The default is 100.
A value of 100 indicates the interval between consecutive retires remains the same irrespective of the
number of retries.
A value lesser than 100 indicates the interval between consecutive retries reduces with each successive
retry.
A value greater than 100 indicates the interval between consecutive retries
increases with each successive retry.
server <1-2> Configures a TACACS authentication server. Up to 2 TACACS servers can be configured
•
<1-2> – Specify the TACACS server index from 1- 2.
timeout <3-60> Configures the timeout, in seconds, for each request sent to the TACACS server. This is the time allowed
to elapse before another request is sent to the TACACS server. If a response is received from the TACACS
server within this time, no retry is attempted.
•
<3-60> – Specify a value from 3- 60 seconds. The default is 3 seconds.
attempts <1-10> Optional. Indicates the number of retry attempts to make before giving up
•
<1-10> – Specify a value from 1 -10. The default is 3.
service
Configures the TACACS authentication service name
protocol
ME> Optional. Specify the authentication protocol used with this TACACS policy.
A maximum of five entries is allowed.
no Resets values or disables commands