Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 970
Brocade Mobility RFS Controller CLI Reference Guide
959
53-1003098-01
13
Configures static address bindings
A static address binding is a collection of configuration parameters, including an IP address,
associated with, or bound to, a DHCP client. Bindings are managed by DHCP servers. DHCP
bindings automatically map a device MAC address to an IP address using a pool of DHCP supplied
addresses. Static bindings assign IP addresses without creating numerous host pools with manual
bindings. Static host bindings use a text file the DHCP server reads. It eliminates the need for a
lengthy configuration file and reduces the space required to maintain address pools.
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
static-binding [client-identifier
Parameters
static-binding [client-identifier
Example
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#static-binding
client-identifier test
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#show context
dhcp-pool testPool
address 192.168.13.4 class dhcpclass1
update dns override
ddns server 192.168.13.9
ddns multiple-user-class
excluded-address range 192.168.13.25 192.168.13.28
netbios-node-type b-node
dns-server 192.168.13.19
netbios-name-server 192.168.13.25
option option1 157.235.208.80
respond-via-unicast
static-route 192.168.13.0/24 192.168.13.7
static-binding client-identifier test
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#
rfs4000-229D58(config-dhcp-policy-test-pool-testPool-binding-test)#?
DHCP static binding Mode commands:
bootfile Boot file name
client-name Client name
default-router Default routers
dns-server DNS Servers
client-identifier
Enables a static binding configuration for a client based on its client identifier (as provided by DHCP
option 61 and its key value)
•
hardware-address
Enables a static binding configuration for a client based on its MAC address
•