Access-time – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 195
Brocade Mobility RFS Controller CLI Reference Guide
179
53-1003098-01
4
access-time
Defines the permitted access time for a client. It is used when no session time is defined in the
RADIUS response.
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
access-time <10-10080>
Parameters
access-time <10-10080>
Example
rfs7000-37FABE(config-captive-portal-test)#access-time 35
rfs7000-37FABE(config-captive-portal-test)#show context
captive-portal test
access-time 35
rfs7000-37FABE(config-captive-portal-test)#
Enables automatic upload of advanced Web pages on a captive portal
Specifies the location of Web pages used for captive portal authentication
Clears the display screen
Commits (saves) changes made in the current session
Ends and exits the current mode and moves to the PRIV EXEC mode
Ends the current mode and moves to the previous mode
Displays the interactive help system
Reverts changes to their last saved configuration
Invokes service commands to troubleshoot or debug
(config-if)
instance
configurations
Displays running system information
Writes information to memory or terminal
Command
Description
Reference
<10-10080>
Defines the access time allowed for a wireless client from 10 - 10080 minutes. The default is 1440 minutes.