Mac-address-table – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 777
764
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
logging facility [local0|local1|local2|local3|local4|local5|local6|local7]
Example
rfs7000-37FABE(config-profile-default-rfs7000)#logging facility local4
rfs7000-37FABE(config-profile-default-rfs7000)#show context
profile rfs7000 default-rfs7000
bridge vlan 1
...................................................
ip dns-server-forward
logging facility local4
ip nat pool pool1
address range 172.16.10.2 172.16.10.8
ip nat inside source list test interface vlan1 pool pool1 overload
lldp timer 20
service pm sys-restart
router ospf
l2tpv3 hostname l2tpv3Host1
l2tpv3 inter-tunnel-bridging
rfs7000-37FABE(config-profile-default-rfs7000)#
Related Commands:
mac-address-table
[<0-7>|alerts|
criticail|debugging|
emergencies|errors|
informational|
notifications|
warnings]
The following keywords are common to the buffered, console, syslog, and forward parameters.
All incoming messages have different severity levels based on their importance. The severity level is fixed on
a scale of 0 - 7.
•
<0-7> – Sets the message logging severity level on a scale of 0 - 7
•
emergencies – Severity level 0: System is unusable
•
alerts – Severity level 1: Requires immediate action
•
critical – Severity level 2: Critical conditions
•
errors – Severity level 3: Error conditions
•
warnings – Severity level 4: Warning conditions (default)
Contd..
•
notifications – Severity level 5: Normal but significant conditions
•
informational – Severity level 6: Informational messages
•
debugging – Severity level 7: Debugging messages
facility [local0|local1|
local2|local3|local4|
local5|local6|local7]
Enables the syslog to decide where to send the incoming message. There are 8 logging facilities, from
syslog0 to syslog7.
•
local0 – Syslog facility local0
•
local1 – Syslog facility local1
•
local2 – Syslog facility local2
•
local3 – Syslog facility local3
•
local4 – Syslog facility local4
•
local5 – Syslog facility local5
•
local6 – Syslog facility local6
•
local7 – Syslog facility local7
Disables logging on this profile