Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 884)

872 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
9
rfs4000-229D58(config-auto-provisioning-policy-test)#no default-adoption
rfs4000-229D58(config-auto-provisioning-policy-test)#no deny precedence 2
rfs4000-229D58(config-auto-provisioning-policy-test)#no deny precedence 3
rfs4000-229D58(config-auto-provisioning-policy-test)#no deny precedence 5
The following example shows the auto-provisioning-policy ‘test’ settings after
the ‘no’ commands are executed:
rfs4000-229D58(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
adopt br81xx precedence 1 rf-domain TechPubs vlan 1
redirect br81xx precedence 4 controller 192.168.13.10 ip 192.168.13.25
192.168.13.25
rfs4000-229D58(config-auto-provisioning-policy-test)#
rfs4000-229D58(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
upgrade ap621 precedence 1 any
upgrade rfs4000 precedence 2 ip 192.168.13.1 192.168.13.5
rfs4000-229D58(config-auto-provisioning-policy-test)#
rfs4000-229D58(config-auto-provisioning-policy-test)#no upgrade precedence 1
rfs4000-229D58(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
upgrade rfs4000 precedence 2 ip 192.168.13.1 192.168.13.5
rfs4000-229D58(config-auto-provisioning-policy-test)#
Related Commands:
adopt Configures an adoption rule
default-adoption Configures the rule for adopting devices when adopt or deny rules are not defined
deny Configures a deny adoption rule
redirect Configures a rule redirecting devices seeking adoption to another controller
upgrade Configures a rule for upgrade of adopted devices