Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 976)

Brocade Mobility RFS Controller CLI Reference Guide 965
53-1003098-01
13
Related Commands:
domain-name
static-binding-mode commands
Sets the domain name for the static binding configuration
Domain names are not case sensitive and contain alphabetic or numeric letters (or a hyphen). A
fully qualified domain name (FQDN) consists of a host name plus a domain name. For example,
computername.domain.com
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
domain-name
Parameters
domain-name
Example
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#domain-name
documentation
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#show context
static-binding client-identifier test
client-name RFID
domain-name documentation
bootfile test.txt
default-router 172.16.10.8 172.16.10.9
dns-server 172.16.10.7
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#
Related Commands:
ip-address
static-binding-mode commands
Configures a fixed IP address for a host
Supported in the following platforms:
no Resets values or disables DHCP pool static binding settings
Defines the domain name for the static binding configuration
no Resets values or disables the DHCP pool static binding settings