Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 759)

746 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
ip default-gateway [|failover|priority [dhcp-client <1-1800>|
static-route <1-1800>]
ip [dns-server-forward|domain-lookup|domain-name |name-server
|
routing]
ip dhcp client [hostname|persistent-lease]
ip igmp snooping {forward-unknown-multicast}
ip igmp snooping {querier} {max-response-time <1-25>|query-interval <1-18000>|
robustness-variable <1-7>|timer expiry <60-300>|version <1-3>}
default-gateway Configures default gateway (next-hop router) parameters
Configures default gateway’s IP address
•
– Specify the default gateway’s IP address.
failover Configures failover to the gateway (with next higher priority) when the current default gateway is
unreachable (In case of multiple default gateways)
priority
[dhcp-client <1-1800>|
static-route <1-1800>] Configures default gateway priority
•
dhcp-client <1-1800> – Defines a priority for the default gateway acquired by the DHCP client on the
VLAN interface
•
static-route <1-1800> – Defines a priority for the statically configured default gateway
The following keyword is common to ‘dhcp-client’ and ‘static-route’ parameters:
•
<1-1800> – Specify the priority from 1 - 18000 (lower the value higher is the priority).
dns-server-forward Enables DNS forwarding. This command enables the forwarding of DNS queries to DNS servers outside of
the network.
domain-lookup Enables domain lookup
domain-name
Configures a default domain name
•
– Specify a name for the DNS.
name-server Configures the name server’s IP address
•
– Specify the IP address of the name server.
routing Enables IP routing of logically addressed packets from their source to their destination
dhcp Configures the DHCP client and host
client
[hostname|persistent-leas
e] Sets the DHCP client
•
hostname – Includes the hostname in the DHCP request
•
persistent-lease – Retains the last lease across reboot if the DHCP server is unreachable
igmp snooping
forward-unknown-multicast Optional. Enables/disables unknown multicast data packets to be flooded in the specified VLAN. By default
this feature is disabled.
igmp snooping querier Optional. Enables/disables the IGMP querier functionality for the specified VLAN. By default IGMP snooping
querier is disabled.
max-response-time
<1-25> Configures the IGMP maximum query response interval used in IGMP V2/V3 queries for the given VLAN.
The default is 10 seconds.
query-interval
<1-18000> Configures the IGMP querier query interval in seconds. Specify a value from 1 - 18000 seconds.
robustness-variable
<1-7> Configures the IGMP robustness variable from 1 - 7
timer expiry <60-300> Configures the other querier time out value for the given VLAN. The default is 60 seconds.
version <1-3> Configures the IGMP query version for the given VLAN. The default is 3.