Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 576)

Brocade Mobility RFS Controller CLI Reference Guide 563
53-1003098-01
7
Example
rfs7000-37FABE(config-profile default-rfs7000-bridge-vlan-1)#edge-vlan
rfs7000-37FABE(config-profile default-rfs7000-bridge-vlan-1)#
Related Commands:
firewall
bridge-vlan-mode commands
Enables firewall on this VLAN interface. This feature is enabled by default.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
firewall
Parameters
None
Example
rfs7000-37FABE(config-profile default-rfs7000-bridge-vlan-1)#firewall
rfs7000-37FABE(config-profile default-rfs7000-bridge-vlan-1)#
Related Commands:
ip
bridge-vlan-mode commands
Configures VLAN bridge IP components
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
ip [arp|dhcp|igmp]
no Disables the edge VLAN mode
no Disables a VLAN’s firewall