Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 364)

348 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
service Service to monitor to show no-service
page to user
rfs7000-37FABE(config-wlan-test)#
The test settings before execution of the no command:
rfs7000-37FABE(config-wlan-test)#show context
wlan test
description TestWLAN
ssid test
bridging-mode local
encryption-type tkip-ccmp
authentication-type eap
kerberos server timeout 12
kerberos server primary host 172.16.10.2
accounting syslog host 172.16.10.4 port 2
data-rates 2.4GHz gn
motorola-extensions wmm-load-information
client-load-balancing probe-req-intvl 5ghz 5
client-load-balancing band-discovery-intvl 2
captive-portal-enforcement fall-back
ip dhcp trust
acl exceed-rate wireless-client-denied-traffic 20 disassociate
enforce-dhcp
broadcast-dhcp validate-offer
http-analyze controller
rfs7000-37FABE(config-wlan-test)#
rfs7000-37FABE(config-wlan-test)#no accounting syslog
rfs7000-37FABE(config-wlan-test)#no description
rfs7000-37FABE(config-wlan-test)#no authentication-type
rfs7000-37FABE(config-wlan-test)#no encryption-type
rfs7000-37FABE(config-wlan-test)#no enforce-dhcp
rfs7000-37FABE(config-wlan-test)#no kerberos server primary host
rfs7000-37FABE(config-wlan-test)#no kerberos server timeout
rfs7000-37FABE(config-wlan-test)#no data-rates 2.4GHz
rfs7000-37FABE(config-wlan-test)#no ip dhcp trust
rfs7000-37FABE(config-wlan-test)#no captive-portal-enforcement
The test settings after the execution of the no command:
rfs7000-37FABE(config-wlan-test)#show context
wlan test
ssid test
bridging-mode local
encryption-type none
authentication-type none
motorola-extensions wmm-load-information
client-load-balancing probe-req-intvl 5ghz 5