Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1006)

996 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
14
logging verbose
logging [icmp-packet-drop|malformed-packet-drop] [all|rate-limited]
Example
rfs7000-37FABE(config-rw-policy-test)#logging verbose
rfs7000-37FABE(config-rw-policy-test)#logging icmp-packet-drop rate-limited
rfs7000-37FABE(config-rw-policy-test)#logging malformed-packet-drop all
rfs7000-37FABE(config-fw-policy-test)#show context
firewall-policy test
ip dos fraggle drop-only
ip dos tcp-sequence-past-window drop-only
ip dos tcp-max-incomplete high 600
ip dos tcp-max-incomplete low 60
ip-mac conflict drop-only
ip-mac routing conflict log-only log-level notifications
flow timeout icmp 16000
flow timeout udp 10000
flow timeout tcp established 1500
flow timeout other 16000
dhcp-offer-convert
logging icmp-packet-drop rate-limited
logging malformed-packet-drop all
logging verbose
dns-snoop entry-timeout 35
rfs7000-37FABE(config-fw-policy-test)#
Related Commands:
no
firewall-policy
Negates a command or sets the default for firewall policy commands
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
logging Configures enhanced firewall logging. This option is disabled by default.
verbose Enables verbose logging
logging Configures enhanced firewall logging
icmp-packet-drop Drops ICMP packets that do not pass sanity checks. The default is none.
malformed-packet-drop Drops raw IP packets that do not pass sanity checks. The default is none.
all Logs all messages
rate-limited Enables rate-limited logging. This option sets the rate limit for log messages to one message every 20
seconds.
no Disables enhanced firewall logging