Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 300)

284 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
dhcp 1 message-type request option-codes exact hexstring 5e4d36780b3a7f
!
client-identity-group ClientIdentityGroup
client-identity TestClientIdentity precedence 1
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP
traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit
DHCP replies"
deny udp any range 137 138 any range 137 138 rule-precedence 20
rule-description "deny windows netbios"
deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP
multicast"
deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP
local broadcast"
permit ip any any rule-precedence 100 rule-description "permit all IP
traffic"
!
ip access-list TestIP_RENAMED
permit tcp any any rule-precedence 10 rule-description "permit all TCP
traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit
DHCP replies"
--More--
rfs4000-229D58(config)#
Related Commands:
rf-domain
Global Configuration Commands
An RF Domain groups devices that can logically belong to one network.
The following table lists the RF Domain configuration mode commands.
rf-domain
rf-domain
Creates an RF Domain or enters the RF Domain configuration context for one or more RF Domains.
If the RF Domain does not exist, it is created.
The configuration of controllers (wireless controllers, service platforms, and access points)
comprises of RF Domains that define regulatory, location, and other relevant policies. At least one
default RF Domain is assigned to each controller.
clone Creates a replica of an existing TLO or device
Command Description Reference
rf-domain Creates a RF Domain policy and enters its configuration mode page 284
rf-domain-mode
commands Invokes RF Domain configuration mode commands page 286