beautypg.com

Session-resumption – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 1073

background image

1064

Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

17

proxy retry-delay <5-10>

Usage Guidelines:

A maximum of five RADIUS proxy servers can be configured. The proxy server attempts six retries
before it times out. The retry count defines the number of times RADIUS requests are transmitted
before giving up. The timeout value is the defines the interval between successive retransmission
of a RADIUS request (in case of no reply).

Example

rfs7000-37FABE(config-radius-server-policy-test)#proxy realm test1 server

172.16

.10.7 port 1025 secret 0 motorolaSol1123

rfs7000-37FABE(config-radius-server-policy-test)#proxy retry-count 4

rfs7000-37FABE(config-radius-server-policy-test)#proxy retry-delay 8

rfs7000-37FABE(config-radius-server-policy-test)#show context

radius-server-policy test

proxy retry-delay 8

proxy retry-count 4

proxy realm test1 server 172.16.10.7 port 1025 secret 0 motorolaSol1123

ldap-server primary host 172.16.10.19 port 162 login "motorolasol" bind-dn

"bind-dn1" base-dn "bas-dn1" passwd 0 motorolasol@123 passwd-attr moto123

group-attr group1 group-filter "groupfilter1" group-membership

groupmembership1 net-timeout 2

rfs7000-37FABE(config-radius-server-policy-test)#

Related Commands:

session-resumption

radius-server-policy

Enables session resumption or fast re-authentication by using cached attributes. This feature
controls the volume and duration cached data is maintained by the server policy, upon termination
of a server policy session. The availability and quick retrieval of the cached data speeds up session
resumption.

This feature is disabled by default.

Supported in the following platforms:

Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point

Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000

Service Platforms — Brocade Mobility RFS9510

retry-delay <5-10>

Sets the proxy server’s retry delay count. This is the interval the controller’s RADIUS server waits before
making an additional connection attempt.

<5-10> – Sets a value from 5 - 10 seconds (default is 5 seconds)

no

Removes or resets the RADIUS proxy server’s settings