Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 610)

Brocade Mobility RFS Controller CLI Reference Guide 597
53-1003098-01
7
dpd-keepalive 11
isakmp-proposal default encryption aes-256 group 2 hash sha
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-policy-testpolicy)#
dpd-retries
crypto-ikev1/ikev2-policy commands
Sets the maximum number of attempts for sending DPD keep alive packets to a peer. Once this
value is exceeded, without a response, the VPN tunnel connection is declared dead. This option is
available only for the IKEv1 policy.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
dpd-retries <1-100>
Parameters
dpd-retries <1-100>
Example
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-policy-testpolicy)#dpd-re
tries 10
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-policy-testpolicy)#show
context
crypto ikev1 policy testpolicy
dpd-keepalive 11
dpd-retries 10
isakmp-proposal default encryption aes-256 group 2 hash sha
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-policy-testpolicy)#
isakmp-proposal
crypto-ikev1/ikev2-policy commands
Configures ISAKMP proposals and their parameters
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
<1-100> Declares a peer dead after the specified number of retries. Specify a value from 1-100.