Radius-user-pool-policy – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 1075
1066
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
17
Syntax:
use [radius-group
Parameters
use [radius-group
Example
rfs7000-37FABE(config-radius-server-policy-test)#use radius-group test
rfs7000-37FABE(config-radius-server-policy-test)#show context
radius-server-policy test
proxy retry-delay 8
proxy retry-count 4
proxy realm test1 server 172.16.10.7 port 1025 secret 0 motorolaSol1123
ldap-server primary host 172.16.10.19 port 162 login "motorolasol" bind-dn
"bind-dn1" base-dn "bas-dn1" passwd 0 motorolasol@123 passwd-attr moto123
group-attr group1 group-filter "groupfilter1" group-membership
groupmembership1 net-timeout 2
use radius-group test
session-resumption lifetime 10 max-entries 11
rfs7000-37FABE(config-radius-server-policy-test)#
Related Commands:
radius-user-pool-policy
Configures a RADIUS user pool policy
A user pool defines policies for individual user access to the internal RADIUS resources. User pool
policies define unique permissions (either temporary or permanent) that control user access to the
local RADIUS resources. A pool can contain a single user or multiple users.
Use the (config) instance to configure RADIUS user pool policy commands. To navigate to the
radius-user-pool-policy instance, use the following commands:
rfs7000-37FABE(config)#radius-user-pool-policy testuser
rfs7000-37FABE(config-radius-user-pool-testuser)#
radius-group
{RAD-GROUP-NAME2}
Associates a specified RADIUS group (for LDAP users) with this RADIUS server policy
You can optionally associate two RADIUS groups with one RADIUS server policy.
radius-user-pool-policy
Associates a specified RADIUS user pool with this RADIUS server policy. Specify a user pool name.
Disassociates a RADIUS group or a RADIUS user pool policy from this RADIUS server policy