Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1200)

1192 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
23
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
cookie-size [0|4|8]
Parameters
cookie-size [0|4|8]
Example
rfs7000-37FABE(config-l2tpv3-policy-L2TPV3Policy1)#cookie-size 8
rfs7000-37FABE(config-l2tpv3-policy-L2TPV3Policy1)#show context
l2tpv3 policy L2TPV3Policy1
cookie-size 8
rfs7000-37FABE(config-l2tpv3-policy-L2TPV3Policy1)#
Related Commands:
failover-delay
l2tpv3-policy-commands
Configures the L2TPv3 tunnel failover delay in seconds. This is the interval after which a failed over
tunnel is re-established.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
fail-over <5-60>
Parameters
cookie-size [0|4|8] Configures the cookie-field size for each data packet. Select one of the following options:
•
0 – No cookie field present in each L2TPv3 data message (this is the default setting)
•
4 – 4 byte cookie field present in each L2TPv3 data message
•
8 – 8 byte cookie field present in each L2TPv3 data message
no Resets the cookie-field size to its default (0 - no cookie field present in each L2TPv3 data packet)