Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 828)

Brocade Mobility RFS Controller CLI Reference Guide 815
53-1003098-01
7
Related Commands:
layout-coordinates
Device Config Commands
Configures X and Y layout coordinates for the device
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
layout-coordinates <-4096.0-4096.0> <-4096.0-4096.0>
Parameters
layout-coordinates <-4096.0-4096.0> <-4096.0-4096.0>
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#layout-coordinates 1 2
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#show context
br71xx 00-04-96-4A-A7-08
use profile default-br71xx
use rf-domain default
hostname TechPubAP7131
area RMZEcospace
floor 5thfloor
layout-coordinates 1.0 2.0
contact motorolasolutions
country-code us
channel-list 2.4GHz 1,2
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#
Related Commands:
license
Device Config Commands
no Removes device’s hostname
<-4096.0-4096.0> Specify the X coordinate from -4096 - 4096.0
<-4096.0-4096.0> Specify the Y coordinate from -4096 - 4096.0
no Removes device’s layout co-ordinates