Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 133)

116 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
3
diff [|] [|]
Example
rfs4000-229D58#diff startup-config running-config
--- startup-config
+++ running-config
@@ -1,3 +1,4 @@
+!### show running-config
!
! Configuration of Brocade Mobility RFS4000 version 5.5.0.0-015D
!
@@ -495,13 +496,11 @@
service-alias testing index 10 proto 9 destination-port range 21 21
!
rfs4000 00-23-68-22-9D-58
- radio-count 0
use profile default-rfs4000
use rf-domain default
hostname rfs4000-229D58
license AP DEFAULT-6AP-LICENSE
license ADSEC DEFAULT-ADV-SEC-LICENSE
- no adoption-site
ip default-gateway 192.168.13.2
ip default-gateway priority static-route 20
interface ge1
rfs4000-229D58#
dir
Privileged Exec Mode Commands
Lists files on a device’s file system
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
dir {/all|/recursive|
Parameters
dir {/all|/recursive|
The first is the source file for the diff command. The second is used for comparison.
The first is the source file’s URL. The second is the second file’s URL.
/all Optional. Lists all files
/recursive Optional. Lists files recursively