Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 120)

Brocade Mobility RFS Controller CLI Reference Guide 103
53-1003098-01
3
crypto pki export trustpoint
{background {on }|on |passphrase
background {on }|on }}
Sets the organization name (2 to 64 characters in length)
Sets the organization unit (2 to 64 characters in length)
{background
{on on } Specify the CA’s location in the following format:
tftp://[:port]/path/file
ftp://:@[:port]/path/file
sftp://@[:port]>/path/file
http://[:port]/path/file
cf:/path/file
usb:/path/file
NOTE: The CSR is exported to the specified location.
•
background – Optional. Performs an export operation in the background
•
on – Optional. Performs an export operation on a specific device
•
– Specify the name of the AP, wireless controller, or
service platform.
email
Exports CSR to a specified e-mail address
•
– Specify the CA’s e-mail address.
fqdn Exports CSR to a specified FQDN
•
– Specify the CA’s FQDN.
ip address Exports CSR to a specified device or system
•
– Specify the CA’s IP address.
pki Enables PKI management. Use this command to authenticate, export, generate, or delete a trustpoint and
its associated CA certificates.
export trustpoint
Exports a trustpoint along with CA certificate, Certificate Revocation List (CRL), server certificate, and
private key
•
– Specify the trustpoint name.
Specify the destination address in the following format:
tftp://[:port]/path/file
ftp://:@[:port]/path/file
sftp://@[:port]>/path/file
http://[:port]/path/file
cf:/path/file
usb:/path/file
background
{on } Optional. Performs an export operation in the background
•
on – Optional. Performs an export operation on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
on Optional. Performs an export operation on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
passphrase
{background {on
}|
on } Optional. Encrypts the key with a passphrase before exporting
•
– Specify the passphrase.
•
background – Optional. Performs export operation in the background
•
on – Optional. Performs export operation on a specified
device
•
– Specify the name of the AP, wireless controller, or
service platform.