Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 482)

468 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
gre
show commands
Displays GRE tunnel info
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show gre info
Parameters
show gre info
Example
nx4500-5CFA2B>show gre info
Gre Tunnel info:
{'No tunnel found': 0}
nx4500-5CFA2B>
interface
show commands
Displays configured system interfaces and their status
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show interface
{|brief|counters|ge|me1|on|port-channel|pppoe1|
switchport|vlan|wwan1}
show interface {|brief|counters|ge <1-4>|me1|on|port-channel
<1-2>|
pppoe1|switchport|vlan <1-4094>|wwan1} {on }
Parameters
show gre info Displays Generic Routing Encapsulation (GRE) information.