Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 681)

668 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Related Commands:
qos
interface-config-instance
Defines Quality of Service (QoS) settings on this interface
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
qos trust [802.1p|cos|dscp]
Parameters
qos trust [802.1p|cos|dscp]
Example
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#qos trust dscp
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#qos trust 802.1p
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#show context
interface ge1
description This\ is\ GigabitEthernet\ interface\ for\ Royal\ King
duplex full
dot1x supplicant username Bob password 0 motorolasolutions@123
ip dhcp trust
ip arp header-mismatch-validation
qos trust dscp
qos trust 802.1p
channel-group 1
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#
Related Commands:
shutdown
interface-config-instance
no Removes PoE settings on this interface
trust [802.1p|cos|dscp] Trusts QoS values ingressing on this interface
•
802.1p – Trusts 802.1p COS values ingressing on this interface
•
cos – Trusts 802.1p COS values ingressing on this interface
•
dscp – Trusts IP DSCP QOS values ingressing on this interface
no Removes QoS settings on the selected interface