Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 104)

Brocade Mobility RFS Controller CLI Reference Guide 87
53-1003098-01
3
clear counters interface [|all|ge <1-5>|me1|port-channel
<1-3>|
pppoe1|vlan <1-4094>|wwan1]
clear counters radio { <1-3>} {(on )}
clear crypto ike sa [|all] {on }
clear crypto ipsec sa {on }
clear event-history
clear firewall [dhcp snoop-table|dos stats|flows] {on }
counters interface
[|all|
ge <1-5>|me1|
port-channel <1-3>|
pppoe1|vlan <1-4094>|
wwan1] Clears interface counters for a specified interface
•
– Clears a specified interface counters. Specify the interface name.
•
all – Clears all interface counters
•
ge <1-5> – Clears GigabitEthernet interface counters. Specify the GigabitEthernet interface index
from 1 - 5.
•
me1 – Clears FastEthernet interface counters
•
port-channel <1- 3> – Clears port-channel interface counters. Specify the port channel interface
index from 1 - 3.
•
pppoe1 – Clears Point-to-Point Protocol over Ethernet (PPPoE) interface counters
•
vlan <1-4094> – Clears interface counters. Specify the Switch Virtual Interface (SVI) VLAN ID from 1
- 4094.
•
wwan1 – Clears wireless WAN interface counters
counters radio Clears wireless radio counters
<1-3> Clears counters of a radio identified by the keyword.
•
– Optional. Specify the hostname or MAC address. Optionally, append the
interface number to form radio ID in the form of AA-BB-CC-DD-EE-FF:RX or HOSTNAME:RX
•
<1-3> – Optional. Specify the radio index (if not specified as part of the radio ID).
The system clears all radio counters, if no MAC address or radio index is specified.
on
The following keyword is recursive and is applicable to the parameter:
•
on – Optional. Clears AP/wireless-client counters on a specified device
or RF Domain
If no MAC address is specified, the system clears all AP or wireless client counters on the specified AP,
wireless controller, service platform, or RF Domain.
crypto Clears encryption module database
ike sa [|all] Clears Internet Key Exchange (IKE) security associations (SAs)
•
– Clears IKE SAs for a certain peer
•
all – Clears IKE SAs for all peers
on Optional. Clears IKE SA entries, for a specified peer or all peers, on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
crypto Clears encryption module database
ipsec sa
{on } Clears Internet Protocol Security (IPSec) database SAs
•
on – Optional. Clears IPSec SA entries on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
event-history Clears event history cache entries
firewall Clears firewall event entries
DHCP snoop-table Clears DHCP snoop table entries
dos stats Clears denial of service statistics