Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 54)

36 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
2
crypto pki generate self-signed
[generate-rsa-key|use-rsa-key]
autogen-subject-name {(email , fqdn ,
ip-address , on )}
Specify the destination address in the following format:
tftp://[:port]/path/file
ftp://:@[:port]/path/file
sftp://@[:port]>/path/file
http://[:port]/path/file
cf:/path/file
usb:/path/file
background
{on } Optional. Performs export operation in the background
•
on – Optional. Performs export operation on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
on Optional. Performs export operation on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
passphrase
{background {on
}|
on } Optional. Encrypts the key with a passphrase before exporting it
•
– Specify the passphrase.
•
background – Optional. Performs export operation in the background
•
on – Optional. Performs export operation on a specified
device
•
– Specify the name of the AP, wireless controller,
or service platform.
pki Enables PKI management. Use this command to authenticate, export, generate, or delete a trustpoint and
its associated CA certificates.
generate Generates a CA certificate and a trustpoint
self-signed
Generates a self-signed CA certificate and a trustpoint
•
– Specify a name for the certificate and its trustpoint.
[generate-rsa-key|
use-rsa-key]
Generates a new RSA Keypair, or uses an existing RSA Keypair
•
generate-rsa-key – Generates a new RSA Keypair for digital authentication
•
use-rsa-key – Uses an existing RSA Keypair for digital authentication
•
– If generating a new RSA Keypair, specify a name for it. If using an existing
RSA Keypair, specify its name.
autogen-subject-name Auto generates the subject name from the configuration parameters. The subject name helps to identify
the certificate
email
Optional. Exports CSR to a specified e-mail address
•
– Specify the CA’s e-mail address.
fqdn Optional. Exports CSR to a specified FQDN
•
– Specify the CA’s FQDN.
ip-address Optional. Exports CSR to a specified device or system
•
– Specify the CA’s IP address.
on Optional. Exports the CSR on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.