Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 236)

220 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
customize show-wireless-meshpoint-neighbor-stats (br-hostname <1-64>,
neighbor-hostname
<1-64>,neighbor-ifid,rx-bytes,rx-errors,rx-packets,rx-throughtput,
tx-bytes,tx-dropped,tx-packets,tx-throughput)
customize show-wireless-meshpoint-neighbor-stats-rf (br-hostname <1-64>,
average-retry-number,error-rate,neighbor-hostname
<1-64>,neighbor-ifid,noise,q-index,
rx-rate,signal,snr,t-index,tx-rate)
is-root Includes the is-root column, which displays the current root state of the meshpoint
mesh-name <1-64> Includes the mesh-name column, which displays the meshpoint’s name
•
<1-64> – Sets the mesh-name column width from 1 - 64 characters
mpid Includes the mpid column, which displays the meshpoint identifier in the AA-BB-CC-DD-EE-FF format
next-hop-hostname
<1-64> Includes the next-hop-hostname column, which displays the next-hop AP’s name (the AP next in the path to
the bound root)
•
<1-64> – Sets the next-hop-hostname column width from 1 - 64 characters
next-hop-ifid Includes the next-hop-ifid column, which displays the next-hop interface identifier in the
AA-BB-CC-DD-EE-FF format
next-hop-use-time Includes the next-hop-use-time column, which displays the time since this meshpoint started using this next
hop
root-bound-time Includes the root-bound-time column, which displays the time since this meshpoint has been bound to the
current root
root-hostname <1-64> Includes the root-hostname column, which displays the root AP’s hostname to which this meshpoint is bound
•
<1-64> – Sets the root-hostname column width from 1 - 64 characters
root-mpid Includes the root-mpid column, which displays the bound root meshpoint identifier in the
AA-BB-CC-DD-EE-FF format
show-wireless-meshpoint-
neighbor-stats Customizes the show wireless meshpoint neighbor stats command output
br-name <1-64> Includes the br-name column, which displays name of the AP reporting a neighbor
•
<1-64> – Sets the br-name column width from 1 - 64 characters
neighbor-hostname
<1-64> Includes the neighbor-hostname column, which displays the reported neighbor’s hostname
•
<1-64> – Sets the neighbor-hostname column width from 1 - 64 characters
neighbor-ifid Includes the neighbor-ifid column, which displays the neighbor’s interface ID
rx-bytes Includes the rx-bytes column, which displays the total bytes received
rx-errors Includes the rx-error column, which displays the total bytes of error received
rx-packets Includes the rx-packets column, which displays the number of packets received
rx-throughput Includes the rx-throughput column, which displays neighbor’s received throughput
tx-bytes Includes the tx-bytes column, which displays the total bytes transmitted
tx-dropped Includes the tx-dropped column, which displays the total bytes dropped
tx-packets Includes the tx-packets column, which displays the number of packets transmitted
tx-throughput Includes the tx-throughput column, which displays neighbor’s transmitted throughput
show-wireless-meshpoint-
neighbor-stats-rf Customizes the show wireless meshpoint neighbor statistics RF command output
br-name <1-64> Includes the br-name column, which displays name of the AP reporting a neighbor
•
<1-64> – Sets the br-name column width from 1 - 64 characters