Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1136)

1128 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
20
Syntax:
area channel-list [2.4GHz|5GHz]
Parameters
area channel-list [2.4GHz|5GHz]
Example
rfs7000-37FABE(config-smart-rf-policy-test)#area test channel-list 2.4GHz
1,2,3
rfs7000-37FABE(config-smart-rf-policy-test)#
rfs7000-37FABE(config-smart-rf-policy-test)#show context
smart-rf-policy test
area test channel-list 2.4GHz 1,2,3
rfs7000-37FABE(config-smart-rf-policy-test)#
Related Commands:
assignable-power
smart-rf-policy
Specifies the power range during power assignment
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
assignable-power [2.4GHz|5GHz] [max|min] <1-20>
Parameters
area Specify the area name.
channel-list [2.4GHz|5GHZ]
Selects the channels for the specified area in the 2.4 GHz or 5.0 GHz band
•
2.4GHz – Selects the channels for the specified area in the 2.4 GHz band
•
5GHz – Selects the channels for the specified area in the 5.0 GHz band
The following keyword is common to the 2.4 GHz and 5.0 GHz bands:
•
– Enter a comma-separated list of channels for the selected band.
no Removes channel list/power configuration for an area