Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 458)

444 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
-----------------------------------------------------------------------------
---
rfs7000-37FABE>
rfs7000-37FABE>show captive-portal-page-upload history
-----------------------------------------------------------------------------
----------
AP RESULT TIME RETRIES UPLOADED-BY
LAST-UPLOAD-ERROR
-----------------------------------------------------------------------------
----------
No upload history is present
rfs7000-37FABE>
rfs7000-37FABE>show captive-portal-page-upload load-image-status
No captive portal advanced page file download is in progress
rfs7000-37FABE>
cdp
show commands
Displays the Cisco Discovery Protocol (CDP) neighbor table
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show cdp [neighbors|report] {detail {on }|on }
Parameters
show cdp [neighbors|report] {detail {on }|on }
Example
The following example shows detailed CDP neighbors table:
rfs7000-37FABE(config)#show cdp neighbors detail on rfs7000-37FABE
-------------------------
Device ID: br7131-11E6C4
Entry address(es):
IP Address: 172.16.10.23
IP Address: 172.16.20.1
cdp [neighbors|report] Displays CDP neighbors table or aggregated CDP neighbors table
detail
{on } Optional. Displays detailed CDP neighbors table or aggregated CDP neighbors table
•
on – Optional. Displays table details on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
on Optional. Displays table details on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.