Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 39)

Brocade Mobility RFS Controller CLI Reference Guide 21
53-1003098-01
2
clear rtls [aeroscout|ekahau]
clear rtls [aeroscout|ekahau] { {on }|
on }
clear spanning-tree detected-protocols {interface|on}
clear spanning-tree detected-protocols {on }
clear spanning-tree detected-protocols {interface [|ge
<1-5>|me1|
port-channel <1-3>|pppoe1|up1|vlan <1-4094>|wwan1]} {on
}
clear vrrp [error-stats|stats] {on }
Parameters
clear arp-cache {on }
clear [cdp|lldp] neighbors {on }
clear counters [br {}|radio {} {<1-3>}|wireless-client
{}] {(on )}
arp-cache Clears Address Resolution Protocol (ARP) cache entries on a AP, wireless controller, or service platform.
This protocol matches the layer 3 IP addresses to the layer 2 MAC addresses.
on Optional. Clears ARP cache entries on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
cdp Clears Cisco Discovery Protocol (CDP) table entries
lldp Clears Link Layer Discovery Protocol (LLDP) table entries
neighbors Clears CDP or LLDP neighbor table entries based on the option selected in the preceding step
on Optional. Clears CDP or LLDP neighbor table entries on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
counters Clears counters based on the parameters passed. The options are: AP, radio, and wireless clients.
br Clears counters for all APs or a specified AP
•
– Optional. Specify the AP’s MAC address.
If no MAC address is specified, all AP counters are cleared.
radio
<1-3> Clears radio interface counters on a specified device or on all devices
•
– Optional. Specify the device’s hostname or MAC address. Optionally, append
the radio interface number (to the radio ID) using one of the following formats: AA-BB-CC-DD-EE-FF:RX
or HOSTNAME:RX (where RX is the interface number).
•
<1-3> – Optional. Identifies the radio interface by its index. Specify the radio interface
index, if not specified as part of the radio ID.
If no device name or MAC address is specified, all radio interface counters are cleared.
wireless-client Clears counters for all wireless clients or a specified wireless client
•
– Optional. Specify the wireless client’s MAC address.
If no MAC address is specified, all wireless client counters are cleared.
on
> This keyword is common to all of the above keywords.
•
on – Optional. Clears AP, radio, or wireless client counters on a specified
AP, wireless controller, service platform, or RF Domain.