Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 397)

Brocade Mobility RFS Controller CLI Reference Guide 381
53-1003098-01
4
Related Commands:
parent-proxy
smart-cache-policy-mode commands
Enables or disables upper-layer parent proxy on this smart cache policy
The parent proxy server requires users to authenticate to access Web sites like WinRoute. This
setting is disabled by default.
Supported in the following platforms:
• Service Platforms — Brocade Mobility RFS9510
Syntax:
parent-proxy [enable|host port <1-32768>]
Parameters
parent-proxy [enable|host port <1-32768>]
Example
nx4500-5CFA2B(config-smart-cache-policy-test)#parent-proxy host 192.168.13.8
port 21
nx4500-5CFA2B(config-smart-cache-policy-test)#
nx4500-5CFA2B(config-smart-cache-policy-test)#show context
smart-cache-policy test
parent-proxy host 192.168.13.8 port 21
cache size 30
http-access precedence 4 deny destination-domain .TechPubs
nx4500-5CFA2B(config-smart-cache-policy-test)#
Related Commands:
smart-cache
smart-cache-policy-mode commands
Enables smart content caching
Supported in the following platforms:
• Service Platforms — Brocade Mobility RFS9510
Syntax:
smart-cache enable
no Removes an ACL
enable Enables parent proxy on this smart cache policy
host
port <1-32768> Configures the hostname or IP address of the parent proxy server
•
– Specify the parent proxy server’s IP address or hostname.
•
port <> – Specify the TCP port number for the parent proxy server. The default port is 8080.
no Disables parent proxy on this smart cache policy