Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1063)

1054 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
17
Example
rfs4000-229D58(config-radius-server-policy-test)#ldap-agent primary
domain-name
symbol domain-admin-user Administrator domain-admin-password 0 Symbol@123
rfs4000-229D58(config-radius-server-policy-test)#
rfs4000-229D58(config-radius-server-policy-test)#show context
radius-server-policy test
ldap-agent primary domain-name symbol domain-admin-user Administrator
domain-admin-password 0 Symbol@123
rfs4000-229D58(config-radius-server-policy-test)#
rfs4000-229D58(config)#show session-config
!
! Configuration of Brocade Mobility RFS4000 version 5.5.0.0-038B
!
!
version 2.3
!
................................................................
meshpoint test
meshid test
beacon-format mesh-point
control-vlan 1
security-mode none
no root
!
smart-rf-policy test
!
wips-policy test
!
radius-server-policy test
ldap-agent primary domain-name symbol domain-admin-user Administrator
domain-admin-password 0 Symbol@123
!
!
--More--
rfs4000-229D58(config)#
Related Commands:
domain-name
This keyword is common to both the ‘primary’ and ‘secondary’ parameters.
•
domain-name – Configures the primary or secondary LDAP server’s domain name
•
– Specify the domain name.
domain-admin-user
This keyword is common to both the ‘primary’ and ‘secondary’ parameters.
•
domain-admin-user – Configures the primary or secondary LDAP server’s admin user name
•
– Specify the admin user’s name.
domain-admin-password [0
|2 ]
This keyword is common to both the ‘primary’ and ‘secondary’ parameters.
•
domain-admin-password – Configures the primary or secondary LDAP server’s admin user password
•
0 – Specifies the password in the unencrypted format
•
2 – Specifies the password in the encrypted format
no Removes LDAP agent settings from this RADIUS server policy