Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1054)

Brocade Mobility RFS Controller CLI Reference Guide 1045
53-1003098-01
17
Related Commands:
rate-limit
radius-group
Sets the rate limit for the guest RADIUS server group
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
rate-limit [from-air|to-air] <100-1000000>
NOTE
The rate-limit setting is not applicable to a management group.
Parameters
rate-limit [from-air|to-air] <100-1000000>
Example
rfs7000-37FABE(config-radius-group-test)##rate-limit to-air 101
rfs7000-37FABE(config-radius-group-test)#show context
radius-group test
guest
policy vlan 1
policy ssid motorolasol
policy day mo
policy day tu
policy day we
policy day th
policy day fr
policy day sa
policy day su
rate-limit to-air 200
policy time start 13:30 end 17:30
rfs7000-37FABE(config-radius-group-test)#
no Removes or modifies a RADIUS group’s access settings
to-air <100-1000000> Sets the rate limit in the downlink direction, from the network to the wireless client
•
<100-1000000> – Sets the rate from 100 - 1000000 Kbps
from-air
<100-1000000> Sets the rate limit in the uplink direction, from the wireless client to the network
•
<100-1000000> – Sets the rate from 100 - 1000000 Kbps