Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 74)

56 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
2
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
no
[adoption|captive-portal|crypto|debug|logging|mac-user-db|page|service|termin
al|
virtual-machine|wireless]
no adoption {on }
no captive-portal client [captive-portal |mac ]
{on }
no crypto pki [server|trustpoint]
no crypto pki [server|trustpoint] {del-key {on
}|
on }
no logging monitor
no mac-user-db user [|all]
no page
no service [enable|locator]
no service enable [l2tpv3|radiusd]
no service locator {on }
no terminal [length|width]
no virtual-machine assign-usb-ports {on }
no wireless client [all|]
no wireless client all {filter|on}
no wireless client all {filter [wlan ]}
no wireless client all {on } {filter [wlan
]}
no wireless client mac {on }
Parameters
no adoption {on }
no adoption
{on
} Resets the adoption status of a specified device or all devices
•
– Optional. Specify the name of the AP, wireless controller, service
platform, or RF Domain. If an RF Domain is specified, the system resets status of all adopted
devices within the specified domain.