Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 208)

192 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
rfs4000-229D58(config-captive-portal-test)#show context
captive-portal test
post-authentication-vlan 1
radius-vlan-assignment
rfs4000-229D58(config-captive-portal-test)#
Related Commands:
redirection
captive-portal-mode commands
Enables redirection of client connections to specified destination ports
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
redirection ports
Parameters
redirection ports
Example
rfs4000-229D58(config-captive-portal-test)#redirection ports 1,2,3
rfs4000-229D58(config-captive-portal-test)#
rfs4000-229D58(config-captive-portal-test)#show context
captive-portal test
redirection ports 1-3
rfs4000-229D58(config-captive-portal-test)#
Related Commands:
server
captive-portal-mode commands
Configures captive portal server parameters, such as the hostname, IP, and mode of operation
Supported in the following platforms:
no Disables assignment of a RADIUS VLAN for this captive portal
post-authentication-vlan Assigns a post authentication RADIUS VLAN for this captive portal’s users
ports Configures destination ports considered for redirecting client connection
no Disables redirection of client connection