Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 75)

Brocade Mobility RFS Controller CLI Reference Guide 57
53-1003098-01
2
no captive-portal client [captive-portal |mac ]
{on }
no crypto pki [server|trustpoint] {del-key {on
}|
on }
no logging monitor
no mac-user-db user [|all]
no page
no service enable [l2tpv3|radiusd]
no captive-portal client Disconnects captive portal clients from the network
captive-portal
Disconnects clients of the captive portal identified by the keyword
•
– Specify the captive portal name.
mac Disconnects a client specified by its MAC address
•
– Specify the client’s MAC address.
on
Optional. Disconnects clients on a specified device or RF Domain
•
– Specify the name of the AP, wireless controller, service platform, or
RF Domain.
no crypto pki Deletes all PKI authentications
[server|trustpoint]
Deletes PKI authentications, such as server certificates and trustpoints
•
server – Deletes server certificates
•
trustpoint – Deletes a trustpoint and its associated certificates
The following keyword is common to the ‘server’ and ‘trustpoint’ parameters:
•
– Deletes a trustpoint or its server certificate. Specify the
trustpoint name.
del-key
{on } Optional. Deletes the private key associated with a server certificate or trustpoint. The operation fails if
the private key is in use by other trustpoints.
•
on – Optional. Deletes the private key on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
no logging monitor Resets terminal lines message logging levels
no mac-user-db user Deletes a specified user or all users from the MAC registration user database
This command is available only on the NX9000 series service platforms.
Deletes the user, identified by the keyword, from the MAC registration user database
•
– Specify the username.
all Deletes all users from the MAC registration user database
no page Resets paging to its default. Disabling paging displays the CLI command output at once, instead of page
by page.
no service Disables specified services or features
enable [l2tpv3|radiusd] Disables the following features:
•
l2tpv3 – Disables L2TPV3
•
radiusd – Disables loading of the RADIUS server on low memory devices