Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 879)

Brocade Mobility RFS Controller CLI Reference Guide 867
53-1003098-01
9
Example
rfs4000-229D58(config-auto-provisioning-policy-test)#redirect br81xx
precedence 4 controller 192.168.13.10 ip 192.168.13.25 192.168.13.25
rfs4000-229D58(config-auto-provisioning-policy-test)#redirect br81xx
precedence 5 controller 192.168.13.10 model-number AP-8132-66040-US
rfs4000-229D58(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
default-adoption
adopt br81xx precedence 1 profile default-br81xx vlan 1
deny br71xx precedence 2 model-number AP7131N
deny br71xx precedence 3 ip 192.168.13.23 192.168.13.23
redirect br81xx precedence 4 controller 192.168.13.10 ip 192.168.13.25
192.168.13.25
redirect br81xx precedence 5 controller 192.168.13.10 model-number
AP-8132-66040-US
rfs4000-229D58(config-auto-provisioning-policy-test)#
Related Commands:
upgrade
auto-provisioning-policy
Adds a device upgrade rule to this auto provisioning policy
When applied to a controller, the upgrade rule ensures adopted devices, of the specified type, are
upgraded automatically.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
upgrade
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000]
serial-number
Configures the device’s serial number
•
– Specify the serial number. Devices matching the specified serial number are
redirected.
vlan Configures the VLAN ID
•
– Specify the VLAN ID. Devices assigned to the specified VLAN are redirected.
no Removes a redirect rule