Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 523)

Brocade Mobility RFS Controller CLI Reference Guide 509
53-1003098-01
6
spanning-tree
show commands
Displays spanning tree utilization information
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show spanning-tree mst {configuration|detail|instance|on}
show spanning-tree mst {configuration} {(on )}
show spanning-tree mst {detail} {interface|on}
show spanning-tree mst {detail} interface {|ge <1-4>|me1|
port-channel <1-2>|pppoe1|vlan <1-4094>|wwan1} {(on )}
show spanning-tree mst {instance <1-15>} {interface }
{(on )}
Parameters
show spanning-tree mst {configuration} {(on )}
show spanning-tree mst {detail} interface {|ge <1-4>|me1|
port-channel <1-2>|pppoe1|vlan <1-4094>|wwan1} {(on )}
spanning-tree Displays spanning tree utilization information
mst Displays Multiple Spanning Tree (MST) related information
configuration
{on } Optional. Displays MST configuration
•
on – Optional. Displays MST configuration on a specified device
•
– Specify the name of the AP or wireless controller.
spanning-tree Displays spanning tree information
mst Displays MST configuration
detail Optional. Displays detailed MST configuration, based on the parameters passed