Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1227)

Brocade Mobility RFS Controller CLI Reference Guide 1219
53-1003098-01
23
peer ip-address {udp {port <1-65535>}}
Parameters
peer ip-address {udp {port <1-65535>}}
Example
rfs7000-37FABE(config-profile
default-rfs7000-l2tpv3-manual-session-test)#peer
ip-address 5.6.7.8 udp port 150
rfs7000-37FABE(config-profile
default-rfs7000-l2tpv3-manual-session-test)#show context
l2tpv3 manual-session test
local-cookie size 8 200 300
local-ip-address 1.2.3.4
peer ip-address 5.6.7.8 udp port 150
mtu 200
local-session-id 1
rfs7000-37FABE(config-profile default-rfs7000-l2tpv3-manual-session-test)#
Related Commands:
remote-cookie
l2tpv3-manual-session-commands
Configures the manual session’s remote cookie field size
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
remote-cookie size [4|8] <1-4294967295> {<1-4294967295>}
Parameters
peer ip-address Configures the tunnel’s peer IP address in the A.B.C.D format
udp {port <1-65335>} Optional. Configures the UDP encapsulation mode for this tunnel (default encapsulation is IP)
•
port <1-65535> – Optional. Configures the peer’s UDP port running the L2TPv3 service. Specify a
value from 1 - 65535.
no Removes the manual session’s peer