Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 883)

Brocade Mobility RFS Controller CLI Reference Guide 871
53-1003098-01
9
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
no [adopt|default-adoption|deny|redirect|upgrade]
no adopt precedence <1-10000>
no deny precedence <1-10000>
no default-adoption
no redirect precedence <1-10000>
no upgrade precedence <1-10000>
Parameters
no adopt precedence <1-10000>
no deny precedence <1-10000>
no default-adoption
no redirect precedence <1-10000>
no upgrade precedence <1-10000>
Example
The following example shows the auto-provisioning-policy ‘test’ settings
before the ‘no’ commands are executed:
rfs4000-229D58(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
default-adoption
adopt br81xx precedence 1 profile default-br81xx vlan 1
deny br71xx precedence 2 model-number AP7131N
deny br71xx precedence 3 ip 192.168.13.23 192.168.13.23
redirect br81xx precedence 4 controller 192.168.13.10 ip 192.168.13.25
192.168.13.25
redirect br81xx precedence 5 controller 192.168.13.10 model-number
AP-8132-66040-US
rfs4000-229D58(config-auto-provisioning-policy-test)#
adopt
precedence <1-10000> Removes the adoption rule identified by the specified precedence
•
precedence <1-10000> – Specify the rule precedence.
deny
precedence <1-10000> Removes the deny adoption rule identified by the specified precedence
•
precedence <1-10000> – Specify the rule precedence.
default-adoption Removes the default adoption rule. When the default adoption rule is absent, devices not matching any of
the configured deny or permit criteria are denied adoption
redirect
precedence <1-10000> Removes the redirect adoption rule identified by the specified precedence
•
precedence <1-10000> – Specify the rule precedence.
upgrade
precedence <1-10000> Removes the device upgrade rule identified by the specified precedence
•
precedence <1-10000> – Specify the rule precedence.