Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 464)

450 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
show critical-resources {on }
Example
rfs4000-229D58(config)#show critical-resources on rfs4000-229D58
--------------------------------------------------------------------------
CRITICAL RESOURCE IP VLAN PING-MODE STATE
--------------------------------------------------------------------------
172.168.1.103 1 arp-icmp up
--------------------------------------------------------------------------
rfs4000-229D58(config)#
crypto
show commands
Displays encryption mode information
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show crypto [ike|ipsec|key|pki]
show crypto ike sa {detail|on|peer|version}
show crypto ike sa {detail|peer } {on }
show crypto ike sa {version [1|2]} {peer } {(on )}
show crypto ipsec sa {detail|on|peer}
show crypto ipsec sa {detail} {on }
show crypto ipsec sa {peer } {detail} {(on )}
show crypto key rsa {on|public-key-detail}
show crypto key rsa {public-key-detail} {(on )}
show crypto pki trustpoints {|all|on}
show crypto pki trustpoints {|all} {(on )}
Parameters
show crypto ike sa {detail|peer } {on }
critical-resources Displays critical resources information
on Optional. Displays critical resource information on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
crypto ike sa Displays Internet Key Exchange (IKE) security association (SA) statistics
detail Displays detailed IKE SA statistics