Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 964
Brocade Mobility RFS Controller CLI Reference Guide
953
53-1003098-01
13
no excluded-address range [
[
no option
no static-binding client-identifier
no static-binding hardware-address
no static-route
no update dns {override}
Example
The following example shows the DHCP pool settings before the ‘no’ commands
are executed:
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#show context
dhcp-pool testPool
network 192.168.13.0/24
address 192.168.13.4 class dhcpclass1
lease 100 23 59 59
ddns server 192.168.13.9
ddns domainname WID
ddns multiple-user-class
excluded-address range 192.168.13.25 192.168.13.28
domain-name documentation
netbios-node-type b-node
no excluded-address
Removes a range of excluded IP addresses from the list of addresses that cannot be issued by the DHCP
server
range
[
[
Removes a range of IP addresses and host aliases associated with this DHCP pool’s excluded address
list.
•
•
•
•
The specified IP addresses and host aliases are removed from the DHCP pool’s excluded address list.
no option
Resets DHCP option information
Defines the DHCP option
no static-binding
Removes static bindings for DHCP client
client-identifier
Resets client identifier information
•
no static-binding
Removes static bindings for a DHCP client
hardware-address
Resets information based on the hardware address
•
no static-route
Removes static routes for this DHCP pool
Removes routing information for a particular subnet
Removes the gateway information from a particular subnet’s routing information
no update dns
Removes DDNS settings
override
Optional. Removes DDNS updates from an onboard DHCP server