Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 1225
Brocade Mobility RFS Controller CLI Reference Guide
1217
53-1003098-01
23
l2tpv3 manual-session test
local-cookie size 8 200 300
local-ip-address 1.2.3.4
mtu 200
local-session-id 1
rfs7000-37FABE(config-profile default-rfs7000-l2tpv3-manual-session-test)#
Related Commands:
no
l2tpv3-manual-session-commands
Negates or reverts L2TPv3 manual session settings to default
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
no [local-cookie|local-ip-address|local-session-id|mtu|peer|remote-cookie|
remote-session-id|traffic-source]
Parameters
no [local-cookie|local-ip-address|local-session-id|mtu|peer|remote-cookie|
remote-session-id|traffic-source]
Example
The following example shows the manual session ‘test’ settings before the ‘no’
commands are executed:
rfs7000-37FABE(config-profile
default-rfs7000-l2tpv3-manual-session-test)#show context
l2tpv3 manual-session test
local-ip-address 1.2.3.4
Resets the MTU size for this manual session to default (1460 bytes)
no local-cookie
Removes the local cookie size configured for a manual session
no local-ip-address
Resets the manual session’s local source IP address and re-establishes the tunnel
no local-session-id
Removes the manual session’s local session ID
no mtu
Resets the manual session’s MTU size to default (1460 bytes)
no peer
Removes the peer configuration from this tunnel
no remote-cookie
Removes the remote cookie field size
no remote-session-id
Removes the manual session’s remote session ID
no traffic-source
Removes the configured traffic source