Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1267)

Brocade Mobility RFS Controller CLI Reference Guide 1259
53-1003098-01
26
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
authentication [access-method|directed-request|server|service]
authentication access-method [all|console|ssh|telnet|web]
{(console|ssh|telnet|web)}
authentication directed-request
authentication server <1-2> [host|retry-timeout-factor|timeout]
authentication server <1-2> host {secret [0 |2
|]}
{port <1-65535>}
authentication server <1-2> retry-timeout-factor <50-200>
authentication server <1-2> timeout <3-60> {attempts <1-10>}
authentication service {protocol }
Parameters
authentication access-method [all|console|ssh|telnet|web]
{(console|ssh|telnet)}
authentication directed-request
authentication server <1-2> host {secret [0 |2 |
]} {port <1-65535>}
access-method Configures access modes for TACACS authentication. The options are: console, SSH, Telnet, Web, and all
all Authenticates users using all access modes (console, SSH, and Telnet)
console Authenticates users using console access only
ssh Authenticates users using SSH access only
telnet Authenticates users using Telnet access only
web Authenticates users using Web interface only
directed-request Enables user to specify TACACS server to use with `@server'. This option is disabled by default.
The specified server should be present in the configured servers list.
server <1-2> Configures a TACACS authentication server. Up to 2 TACACS servers can be configured
•
<1-2> – Specify the TACACS server index from 1 - 2.
host Sets the TACACS server’s IP address or hostname
secret [0 |
2 |] Configures the secret key used to authenticate with the TACACS server
•
0 – Configures a clear text secret
•
2 – Configures an encrypted secret
•
– Specify the secret key. The shared key should not exceed 127 characters.
port <1-65535> Optional. Specifies the port used to connect to the TACACS server
•
<1-65535> – Specify a value for the TCP authentication port from 1 - 65535. The default port is
49.