Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1271)

Brocade Mobility RFS Controller CLI Reference Guide 1263
53-1003098-01
26
rfs7000-37FABE(config-aaa-tacacs-policy-test)#
Related Commands:
no
aaa-tacacs-policy
Negates a AAA TACACS policy command or sets its default
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
no [accounting|authentication|authorization]
Parameters
no
Example
The following example shows the AAA-TACACS policy ‘test’ settings before the
‘no’ commands are executed:
rfs7000-37FABE(config-aaa-tacacs-policy-test)#show context
aaa-tacacs-policy test
authentication directed-request
accounting server preference authorized-server-number
authorization allow-privileged-commands
accounting auth-fail
accounting commands
rfs7000-37FABE(config-aaa-tacacs-policy-test)#
rfs7000-37FABE(config-aaa-tacacs-policy-test)#no authentication
directed-request
rfs7000-37FABE(config-aaa-tacacs-policy-test)#no accounting auth-fail
rfs7000-37FABE(config-aaa-tacacs-policy-test)#no authorization
allow-privileged-
commands
The following example shows the AAA-TACACS policy ‘test’ settings after the
‘no’ commands are executed:
rfs7000-37FABE(config-aaa-tacacs-policy-test)#show context
aaa-tacacs-policy test
accounting server preference authorized-server-number
no Resets values or disables commands
no Provide the parameters needed to reset or disable the desired AAA-TACACS policy setting.