Redirect – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 876
864
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
9
Example
rfs4000-229D58(config-auto-provisioning-policy-test)#deny br71xx precedence 2
model-number AP7131N
rfs4000-229D58(config-auto-provisioning-policy-test)#deny br71xx precedence 3
ip 192.168.13.23 192.168.13.23
rfs4000-229D58(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
adopt br81xx precedence 1 profile default-br81xx vlan 1
deny br71xx precedence 2 model-number AP7131N
deny br71xx precedence 3 ip 192.168.13.23 192.168.13.23
rfs4000-229D58(config-auto-provisioning-policy-test)#
Related Commands:
redirect
Adds a rule redirecting device adoption to another controller within the system. Devices seeking
adoption are redirected to a specified controller based on the redirection parameters specified.
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
redirect
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000]
redirect
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>
controller [
[any|cdp-match|dhcp-option|
fqdn|ip|lldp-match|mac|model-number|serial-number|vlan]
serial-number
Denies adoption if a device’s serial number matches
•
vlan
Denies adoption if a device’s VLAN matches
•
Removes a deny adoption rule